Windows 7 will automatically recognize the new drive and install the necessary drivers. Connect the other end to an available SATA connector on the motherboard.Ĭlose the case, plug in the power cable and boot up the computer. This power connection is the longer of the two L-shaped connectors on the back of the drive.Īttach a SATA data cable to the shorter L-shaped SATA connector on the drive. Plug a spare SATA power cable from your computer's power supply to the SATA power connector on the drive. You shouldn't need more than two fingers to sufficiently tighten the screws. Be careful not to over-tighten the screws. Without a DVD drive in your laptop, you can use some sort of DVD ripping program helping to.
Secure the DVD drive with four Philips-head screws, two on each side of the drive, using a Philips-head screwdriver. If you want to know how to play DVD on laptop without a DVD drive, this article can help you a lot. On some cases, you may need to remove its front panel before inserting the DVD drive. The front of the DVD drive should be flush with the front of the case. Open File Explorer.Navigate to 'This PC' from the left navigation pane.Find your DVD drive under 'Devices and drives'.Open the drive's properties.Navigate to the Hardware tab.Open the. Slide the DVD drive into the front of the slot, such that the side with all the connections goes in first. Be careful not to touch other electronics in the case. step 4: To Custom Install Windows 10 with an ISO file.
step 3: To Custom Install Windows 10 with bootable USB.
2 Do the step below depending on how you want to do a custom install of Windows 10. If you can reach it, it might be easier to knock this face-plate off from inside of the case by pushing it with the screwdriver handle. This is to avoid Windows Setup from installing files or partitions on other hard drives by mistake. Use a flat-head screwdriver to pry out the face-plate that covers the 5.25-inch slot. Some manufacturers have a different style of case, so consult your computer manual for instructions on opening the case or removing the side panels.Īttach an anti-static wrist-band from your wrist to the metal chassis of the computer case. Open both sides of your computer case by unscrewing the side screws on the back of your computer and sliding off the side panels.